Most new construction worksites in Singapore are not notifiable to MOM as factories. Since 2019 they have been exempt from factory notification and registration. That does not make the site free of reporting duties: BCA, LTA, PUB and NEA each run their own notification or approval steps, and the Workplace Safety and Health (WSH) rules apply in full from the first day. The practical task for a contractor or developer is to map which agency needs what, and when, before work starts. Our Design for Safety, ConSASS and WSH audit teams work on exactly this boundary between permits, notifications and on-site safety duties.
TL;DR
- New construction worksites do not need MOM factory notification or registration. Building operations and engineering construction fall under the exemption.
- Notification thresholds under MOM apply to non-exempt factories: a one-time notification for low-risk activities, registration for high-risk ones.
- Exemption from registration is not exemption from safety duties. The WSH (Construction) Regulations 2007 apply to all worksites.
- Other agencies have their own notifications: BCA (pre-construction survey for landed homes), LTA (road works), PUB (water service and watermains) and NEA (construction noise).
- Penalties for serious WSH failures rose from 1 June 2024, so risk assessment, competent appointments and training carry the heaviest enforcement weight.
Table of Contents
- What “notifiable works” means for a construction site
- What changed in 2019 and why it matters
- Getting a workplace number without a factory notification
- Notifications that still apply on a live project
- Duties that apply whether or not anything is notified
- What happens when reporting and safety duties are missed
- A pre-start checklist for contractors and developers
- Where we fit in
- Our perspective
- FAQ
- Sources
What “notifiable works” means for a construction site
The phrase is used loosely in Singapore. A site manager may mean a MOM factory notification, a BCA permit, an LTA road occupation notice or a PUB advisory. These are different regimes run by different agencies, and each has its own trigger.
The MOM definition is the narrowest. Under MOM’s factory notification and registration requirements, building operations and engineering construction are covered by the construction-worksite exemption. That includes construction, demolition, structural alteration, repair, maintenance, lift replacement, site preparation and foundation laying. A new construction worksite therefore does not file a factory notification or register as a factory.
The thresholds on that page apply to non-exempt factories. Low-risk factory activities need a one-time notification before operations begin. High-risk activities need registration. A very-low-risk factory can be exempt only if it has fewer than 10 employees and no specified hazardous equipment or substances.
If your company runs a permanent workshop, a precast yard or a fabrication shop alongside its sites, that facility is assessed as a factory in its own right. The site exemption does not carry over to it.
What changed in 2019 and why it matters
MOM issued a circular in 2019 removing the registration requirement for construction worksites. The change took away an administrative step. It did not take away any substantive safety control: the sites remain subject to the Workplace Safety and Health Act, the Construction Regulations and safety and health management system requirements.
This is the point many teams miss. Registration was a filing. The duties that decide whether a worksite is safe, and whether an inspector is satisfied, sit in the WSH framework. The WSH (Construction) Regulations 2007 apply to all worksites in Singapore, whether or not a site was ever registered.
For a deeper read on those duties, see our WSH construction sector regulation guide and our overview of statutory safety requirements in Singapore.
Getting a workplace number without a factory notification
Even an exempt site often needs a workplace number to carry out WSH transactions, such as submitting a ConSASS audit. MOM’s guidance on obtaining a workplace number sets out two routes:
- A BCA permit for structural works has been applied for. MOM receives the worksite record from BCA and emails the workplace number.
- No BCA permit is required. The company creates a non-notifiable workplace record in MOM’s WSH eService, enters the project description and the contract reference number from the Letter of Award, and notes the workplace number shown after submission.
Keep the workplace number in the project file from the start. It is needed again for later submissions, and a missing number is a common cause of delay at audit time.
Notifications that still apply on a live project
The exemption from MOM registration leaves several other agency touchpoints. The table summarizes the ones the research supports. Confirm the current form and lead time on each agency’s page before you commit a programme.
| Agency | What triggers it | What is required |
|---|---|---|
| MOM | Non-exempt factory (not a construction worksite) | One-time notification for low-risk activities; registration for high-risk activities |
| MOM | Exempt worksite needing a workplace number | Workplace record in WSH eService, or number issued after a BCA structural permit application |
| BCA | Landed development involving demolition, piling, foundation, tunnelling or site formation | Pre-construction survey, neighbour notification and written access consent where necessary |
| LTA | Lane or road closure for road works | Notification through LTA.PROMPT at least seven days beforehand |
| PUB | Water service installation; works near watermains | Notification with site plan and schematic drawing; clearance for watermains of 300 mm or more |
| NEA | Construction work generating noise | Compliance with construction-noise controls, separate from MOM rules |
BCA: pre-construction survey for landed homes
For landed developments, BCA requires a pre-construction survey before demolition, piling, foundation, tunnelling or site-formation works. It also requires neighbour notification and written access consent where necessary. Builders working on bungalows and semi-detached homes should treat this as a gate before the first excavation, not a paperwork task during it.
LTA: road works
LTA’s FAQ states that road works require notification through LTA.PROMPT at least seven days before a lane or road closure. This is a road-occupation requirement and is unrelated to MOM’s construction-worksite rules. Build the seven days into the traffic management plan, not around it.
PUB: water services and watermains
PUB requires notification before water-service installation works. Its handbook on water supply applications lists a site plan and schematic drawing, plus estimated water requirements, licensed-plumber particulars, development type and expected start and completion dates.
Near existing pipes, PUB’s watermain advisory draws a line at 300 mm. For watermains below 300 mm, notification is generally sufficient. For 300 mm or more, clearance must be obtained before work starts. The difference matters for excavation sequencing, because clearance can hold a start date.
NEA: construction noise
NEA defines construction work broadly. In its construction noise FAQ, it covers the construction, erection, alteration, repair or maintenance of buildings, structures or roads, as well as piling, demolition, dredging and other engineering construction. Noise limits and working-hour restrictions are a separate control from any MOM notification, so a site can be exempt from one and still bound by the other.
Duties that apply whether or not anything is notified
The agency steps above are the visible part of compliance. The larger exposure is in the duties that run through the whole project.
Video surveillance on larger sites
From 1 June 2024, the occupier of a relevant construction worksite with a contract value of $5 million or more must install and operate video surveillance at specified high-risk locations. These include work at height where a person may fall more than 2 metres, scaffold and formwork erection or dismantling, and excavation and shoring. MOM describes the measure as preventive: remote monitoring and recorded footage deter unsafe behaviour, support training and assist investigations.
ConSASS audits
Where a ConSASS audit is required, submission is online after the audit. MOM’s page on submitting a ConSASS audit states that the WSH auditor and the company representative need Singpass, the workplace number, the workplace name and address, and the completed checklist, scorecard and final audit report. The workplace number from the previous section is therefore a prerequisite for this step. Our guides on preparing a ConSASS submission and ConSASS documentation go through the file in order.
Design for Safety
The WSH (Design for Safety) Regulations 2015 came into operation on 1 August 2016. The WSH Council explains that designers should reduce foreseeable design risks through the design plan, while contractors inform the developer of foreseeable risks, carry out risk assessments, ensure competent persons and ensure safety during construction. A DfS Professional convenes review meetings for the developer, keeps the DfS Register up to date and provides information on identified risks and mitigation, as set out on the same page.
This role sits upstream of every notification in the table, because design decisions determine what kind of demolition, excavation or work at height the site will face. Our guides to the Design for Safety Professional and the DFSP lifecycle describe the role in detail.
What happens when reporting and safety duties are missed
The exposure is heaviest where harm is possible. From 1 June 2024, MOM raised the maximum fine for breaches of WSH subsidiary legislation that are a major cause of death, serious bodily injury or a dangerous occurrence from $20,000 to $50,000. Its announcement of the increase gives examples: failure to conduct a risk assessment, to appoint competent personnel, to train workers, to provide personal protective equipment or to maintain critical equipment.
The pattern is clear. The penalty framework separates failures that cause serious harm from supporting or administrative failures, and puts its strongest emphasis on risk assessment, competent appointments, training, protective systems and equipment maintenance. A site that files every agency form but has a thin risk assessment is the one exposed.
A pre-start checklist for contractors and developers
Use this sequence before mobilization. It follows the sources above.
- Classify the premises. A construction worksite is exempt from MOM factory registration. A workshop or yard on the same project may be a factory and may need notification or registration.
- Establish the workplace number. Through the BCA structural permit route, or by creating a non-notifiable workplace record in WSH eService with the Letter of Award reference.
- Check BCA requirements. For landed development, schedule the pre-construction survey and neighbour communication before demolition, piling or foundation work.
- Check utilities. Identify watermains near the excavation and note which need clearance (300 mm or more) rather than notification.
- Plan road occupation. Submit through LTA.PROMPT at least seven days before any lane or road closure.
- Plan for noise. Review NEA construction-noise controls against the programme of piling and demolition.
- Confirm the video surveillance threshold. At $5 million contract value or more, plan camera coverage for work at height above 2 metres, scaffold and formwork, and excavation and shoring.
- Document the risk assessment and competent appointments. These attract the heaviest penalty emphasis.
- Confirm audit obligations. If a ConSASS audit applies, align the audit schedule with the workplace number and the Singpass access of the auditor and the company representative.
Our guide to the risk assessment process in Singapore construction covers step 8 in more depth.
Where we fit in
MOSAIC Ecoconstruction Solutions has more than 20 years of experience in Quality, Environment and Safety consultancy for the construction sector. Our work covers WSH audit and inspection, ConSASS, the Design for Safety Professional role, EHS advisory and documentation, BizSAFE and ISO certification, training and EHS manpower outsourcing. A multi-industry consultant team supports each engagement, with continuous support after it.
If you want the agency touchpoints, WSH duties and audit obligations of a specific project mapped before mobilization, start from our consultancy service.
For firms building toward BizSAFE Level 3, 4 or Star, the same documentation discipline feeds the certification file; see our BizSAFE service.
Our perspective
The 2019 change is often read as deregulation. We read it as a shift of weight. Once a registration form no longer marks the start of a project, the evidence of compliance has to come from the substance: a risk assessment that matches the actual work, appointments that match the actual competence, and a safety management system that is operated and not merely filed.
In our experience of construction safety consultancy over more than 20 years, the sites that stay in control are the ones that treat each agency step as a checkpoint in one integrated plan. Design for Safety decisions set the hazards, the risk assessment controls them, the audit confirms that the controls work, and the agency notifications follow from the programme. Treated separately, each of these becomes a late-stage scramble.
This is why our work spans DfS, ConSASS, WSH audits and certification support under one team. A developer or contractor then deals with one consistent view of the project’s obligations, from design through to handover.
Aman
FAQ
Are construction worksites notifiable to MOM in Singapore?
No. New construction worksites are exempt from MOM factory notification and registration, following the 2019 change. Safety obligations under the WSH Act and the Construction Regulations continue to apply. A workplace record may still be needed for WSH transactions.
How do I get a workplace number for a site that does not need registration?
If a BCA structural works permit has been applied for, MOM receives the worksite record from BCA and emails the workplace number. Otherwise, create a non-notifiable workplace record in WSH eService, entering the project description and the Letter of Award contract reference number.
Which agency do I notify for road works?
LTA. Road works need notification through LTA.PROMPT at least seven days before a lane or road closure. This is separate from any MOM requirement, so plan it into the traffic management schedule.
When is video surveillance mandatory on a construction site?
From 1 June 2024, occupiers of relevant worksites with a contract value of $5 million or more must install and operate video surveillance at specified high-risk locations. These include work at height where a fall of more than 2 metres is possible, scaffold and formwork work, and excavation and shoring.
What are the penalties for serious WSH failures?
Since 1 June 2024, the maximum fine for subsidiary-legislation breaches that are a major cause of death, serious injury or a dangerous occurrence is $50,000, up from $20,000. Examples include missing risk assessments, untrained workers and poorly maintained critical equipment.
Sources
- MOM: Factory notification and registration requirements
- MOM: Circular on removal of registration requirement for construction worksites
- Singapore Statutes Online: WSH (Construction) Regulations 2007
- MOM: Getting a workplace number for a worksite that does not need registration
- BCA: Pre-construction survey and communication plan for landed development
- LTA: PROMPT FAQ
- PUB: Handbook on application for water supply
- PUB: Advisory note on prevention of damage to watermains
- NEA: Construction noise control FAQs
- Singapore Statutes Online: video surveillance subsidiary legislation, 2024
- MOM: Increase in maximum fines and mandatory video surveillance
- MOM: Submit a ConSASS audit
- Singapore Statutes Online: WSH (Design for Safety) Regulations 2015
- WSH Council: About Design for Safety





